Damage Roof Inspections

Visual Damage Roof Inspections Daytona, Palm Coast, Melbourne, Jacksonville are provided by licensed engineers and experienced technicians a set of ‘eyes’ during all phases of the installation. Critical areas such as fastening patterns of underlying insulation, mopping techniques, or glue application and drying times can be monitored for compliance with the contract documents and manufacturer’s standards.

EMA’s Damage roof inspections have extensive experience to observe all phases of a roof installation to ensure materials are in compliance with project documents. Prior to the start of work, our inspectors are provided specifications, drawings, shop drawings and submittal. The inspector’s attendance at the Pre-Job Conference with respective contractual parties allows a thorough understanding of the system installation, set-up areas and anticipated internal disruptions. The inspector generates Damage Roof Inspection Reports which delineates material and installation compliance, and documents any unforeseen contingent items to the contract. Non-compliance issues are immediately addressed with the roofing contractor, design professional or building owner to ensure proper installation of the specified roofing assembly. We provide roof inspection in, St. Augustine, Palm Coast, Palm Bay, Cocoa, Rockledge, Daytona Beach, Melbourne, Orlando, & Tampa.

Daytona roof inspections, tampa roof damage inspections — Damaged Roof inspections for residential and commercial structures

Inspections Daytona by Licensed Engineers.

EMA roof engineers can inspect and perform damaged roof inspections daytona, Cocoa, Ormond beach, Palm Coast on any roof system including concrete roofs, gravel and shingled roofs. After hurricanes, or natural disasters including lightening strikes the roof may get damaged. That is where we send our professional engineers and inspectors to do a thorough inspections of roofing and intent of damages for insurance claim purpose and repairs.

We also perform various structurally damaged roof inspections including initial tig-tag , structural in progress and structural final inspections for shingled, tile roofs. We also perform roof static uplift test TAS-105, TAS-106, Bell Chamber (TAS-124), Thermal Imaging etc. Various Services are performed and a Sealed and Signed report is prepared for the client.

We also perform damage roof inspections for all shingle, metal & clay tile or concrete tile roofs after any storm or hurricane as per Florida building code chapter 15. please call for our services.

daytona roof inspections — Damage roof inspections

Damage Roof Inspections & Testing.

EMA Engineers performs detailed, professional damage roof inspections in Volusia, Flagler, Duval, Indian River, Brevard, Orange, Polk, Lake counties with state-of-the-art moisture detection devices and gives thorough explanations with digital pictures.

Roof Damage Inspection Procedure.

The starting point of the roof Inspection Daytona should be the roof of the building. The interior walls and ceilings should be checked for signs of water staining. After inspecting the interior by a damaged roof inspections engineer thorough inspection of the exterior walls should be made along with the roof system.

The following roof components should be inspected:

Flashing: These are the protection for the membrane termination and often provide a waterproof cover at the membrane termination. These include Counter- flashing, expansion joint covers, copings and flashing at walls and curbs. A variety of problems may occur at these vulnerable locations by damage roof inspections throughout East and Central Florida as well as Tampa, Orlando & Ft. Lauderdale.

Penetrations: These are pipes, drains, vents, stacks and other items that penetrate the roof membrane. These MUST be flashed properly to assure a watertight roof system by roof engineers.

Field Membrane – What to look for:

· Open seams excessive blisters, wrinkles, ridges or areas of non-adhered membrane.
· Worn spots holes or deteriorated areas of the membrane.
· Deteriorated, areas of surface coating on the membrane.
· Adequate, drainage and ponding problems of the membrane checked by roof inspections.
· Areas around rooftop equipment that may have been degraded by leaks or spills or punctured by dropped equipment parts.

How to Inspect damage Roof inspections Types

The first protection any house has against the elements is the roof and there are a variety of roofing materials. You can learn a few basics about each material that will help you spot damage that needs to be repaired or roofing that should be replaced as reported in roof inspections.

Shingles damage roof inspections

Asphalt roofing surfaces are granular. When asphalt shingles age they become brittle from the sun and other elements. Then the granules can detach from the shingles. Check in the gutters and at the end of the downspouts for asphalt granule deposits. Inspect the roof for spots that look bare where all the granules have detached and been washed away. Also inspect for missing, torn or warped shingles. When the edges or corners of shingles are rising or curling, they have outlived their usefulness and will need replacing. Also look for indentations or punctures from hail damage. This can be far more costly than simply adding shingles so knowing how many layers are on the roof and the legal limitations can be valuable. You can commonly determine how many layers are present by examining the edge of the roof during damage roof inspections.

Metal Damage Roof Inspections

Metal roofs are commonly steel, copper, aluminum, or galvanized iron. Most metal roofs have a life expectancy of about 50 years. Perforations, pits, rust, or corrosion can help determine the age of the roof. Check the seams, corners, and joints for loose, dried out, or peeling caulk or other seam material while performing damage roof inspections.

Slate or Clay Tile metal Roof Inspections

tile damage inspections — ema structural engineers tile roof inspections

Damage Roof Inspections of 3 most common tile roof materials and these are concrete tile, clay or terracotta tile, and composite or light weight tiles. The most common tile is made of concrete and you can identify these roofs by the thickness and absence of color on the bottom or underside of the tiles. They often have 75 years or lifetime warranties. However they can leak sooner depending on the quality of workmanship. Local codes and the area of the country will require these tiles be attached with nails, construction adhesives, battens, screws, foam, or a combination of fasteners noted during damage roof inspections.

Composite tile damage roof inspections are not as popular and are made to resemble clay tile. They are principally installed on homes that lack the structural ability to hold much heavier concrete. Composite tiles also cost less to install.

Clay tile roof inspections comes in two types: terracotta and sand cast. Terracotta tile look just like the material of clay flower pots. Sand cast tiles come in different colors noted during damage roof inspections.

Slate and clay tile roofs and even cement shingles are designed to last as long as the structure when cared for properly. However they can be broken by hail, ice, or by walking on them. Avoid walking on these materials and use a drone or binoculars to look for any missing tiles or ones that are chipped or broken roof inspections.

Wooden Shakes Damage roof inspections

This is another roofing material you should not be walking on. Inspect these roofs from a ladder, with binoculars or a drone camera. Wooden shakes are split by hand, and wood shingles are sawed and tapered. Weather will deteriorate wood shakes and shingles over time. See if there are missing rotted, warped, or broken shingles or shakes. As a general rule of thumb if a third or more of these roofs are damaged, the whole roof needs replacement.

http://pntscr.com/cqt1b3http://b2b.bridgat.com/u99512

http://fonolive.com/b/us/jacksonville-fl//17856019/ema-structural-forensic-engineers

http://linktown.khou.com/biz/ema-structural-forensic-engineers/jacksonville/fl/32266/68878032

Roof Inspections Jacksonville

Roof inspection jacksonville engineers can inspect and perform damaged roof inspections in Jacksonville, Cocoa, Ormond beach, St. Augustine, Cocoa, Melbourne,& Palm Coast on any roof system including concrete roofs, gravel and shingled roofs. After hurricanes, or natural disasters including lightening strikes the roof may get damaged and may need a roof inspections jacksonville visit. That is where we send our professional engineers and inspectors to do a thorough inspections of roofing and intent of damages for insurance claim purpose and repairs.

We also perform wind damaged roof inspections jacksonville roofing inspections for all shingle, metal & clay tile or concrete tile roofs as per Florida building code chapter 15. please call for our services.

Roof Inspections Jacksonville & Testing.

EMA Engineers performs detailed, professional visual roof inspections Jacksonville with state-of-the-art moisture detection devices and gives thorough explanations with digital pictures.

TAS 105 – Fastener Withdrawal Resistance Testing
TAS 106 – Uplift Resistance Testing Tile Roof by Roof Inspections Jacksonville.
TAS 109 – Polyurethane Foam Roofing (pending certification).
TAS 124 – Existing and New Roof Wind Uplift Resistance Testing.

Roof Inspections Jacksonville INSPECTION PROCEDURES

The starting point of the roof Inspection Jacksonville is the roof of the building. The interior walls and ceilings should be checked for signs of water staining. After inspecting the interior by a damaged roof inspections daytona engineer thorough inspection of the exterior walls should be made along with the roof system.

The following roof components should be inspected:

Flashing: These are the protection for the membrane termination and often provide a waterproof cover at the membrane termination. These include Counter- flashing, expansion joint covers, copings and flashing at walls and curbs. A variety of problems may occur at these vulnerable locations by damaged roof inspections Jacksonville in Central Florida as well as Tampa, Orlando & Ft. Lauderdale.

Penetrations: These are pipes, drains, vents, stacks and other items that penetrate the roof membrane. These MUST be flashed properly to assure a watertight roof system by roof engineers.

Field Membrane – What to look for:

· Open seams excessive blisters, wrinkles, ridges or areas of non-adhered membrane.
· Worn spots holes or deteriorated areas of the membrane.
· Deteriorated, areas of surface coating on the membrane through roof inspections jacksonville.
· Adequate, drainage and ponding problems of the membrane checked by roof inspections Daytona.
· Areas around rooftop equipment that may have been degraded by leaks or spills or punctured by dropped equipment parts.

Roof Inspections Jacksonville.

Roof inspections jacksonville Service is recognized by the roofing industry as a vital component of successful Roof Construction Management. Many vital areas of a roof installation are not visible for inspection upon completion and many times are already covered over before periodic site inspections can be made.

Full-time roof inspection jacksonville Inspection provides a set of ‘eyes’ during all phases of the installation. Critical areas such as fastening patterns of underlying insulation, mopping techniques, or glue application and drying times can be monitored for compliance with the contract documents and manufacturer’s standards by roof inspections jacksonville.

Count On EMA and Our Trained Roof Inspectors
EMA’s roof inspectors have extensive experience to observe all phases of a roof installation to ensure materials are in compliance with project documents. Prior to the start of work, our inspectors are provided specifications, drawings, shop drawings and submittals. The inspector’s attendance at the Pre-Job Conference with respective contractual parties allows a thorough understanding of the system installation, set-up areas and anticipated internal disruptions. The inspector generates Daily Roof Inspection Reports which delineates material and installation compliance, and documents any unforeseen contingent items to the contract. Non-compliance issues are immediately addressed with the roofing contractor, design professional or building owner to ensure proper installation of the specified roofing assembly. We provide roof inspections jacksonville, St. Augustine, Daytona Beach, Melbourne, Orlando, & Tampa.

ttps://plus.google.com/109108893098752996440/about

https://foursquare.com/v/ema-structural-forensic-engineers/57f67a4f498e015eb5f61376

http://prntscr.com/cqmbgvhttp://prntscr.com/cqlynh

http://directory.wfaa.com/biz/ema-structural-forensic-engineers/jacksonville/fl/32266/68878032

http://tupalo.com/en/jacksonville-florida/ema-structural-forensic-engineers

http://prntscr.com/cqm9hd

http://ezlocal.com/fl/jacksonville/structural-engineer/1680919

http://linktown.khou.com/biz/ema-structural-forensic-engineers/jacksonville/fl/32266/68878032